MCC 3.15.00 and PIC16F1938 (IvanP)
Hello,i installed MCC 3.15.0 but when i set the oscillator at 32MHz, in the notification windows is a warning (system clock is greater then reccomended value (20.000000 Mhz), Why?All other parameters...
View ArticlePIC18F45K80 unable to set PORTC,6 as output (jswanson)
When I click on the output pin the box border turns black, but the pin is not selected. If I click on the input pin, It is selected. I then tick the Output box in the Pin Module and the Pin manager...
View ArticleBootloader error command ReadProgram (Maxl71)
Hello! I wrote the application-loger on the android for quick firmware download/upload via bluetooth. I use microcontroller 12f(lf)1822 or 16f(lf)1823 (have Usart module) and popular bluetooth module...
View ArticleMCC 3.15.00 and PIC12F1840 devices pin count is incorrect. (sylphio)
After updating to MCC 3.15 the pic12F1840 (a 8 pin device) is now represented by a 18pin device (dip,soic, all layout) in MCC.I got this problem on a existing project and a new ones. Thank..
View Articleclock() in C run time lib kills Timer1,2,3 (dambrose)
MCC Plugin V3.0.5 MPLABX v3.26 Compiler: XC16 V1.25 OS Windows 7 Pro English UC: PIC24FJ64GA004 External 6.00 MHZ clock with PLL enabled My program was not using any timers but it was using the clock()...
View ArticleHow to Enable WPU, IOCP or IOCN (dcarrington)
First time user of MCC 3.03.Environment:MPLAB X 3.20XC16 1.25PIC24FV32KA301Using the MCC Pin Module I have successfully set PIC24 pins to their appropriate mode. In my case, there is one A/D channel, 5...
View ArticleSupported Devices List (CScotty)
Where can i find a list of devices supported by each version of the Code Configurator? Thanks...
View ArticleMCC v3.1.5 with 24EP512GP204 PLL issue (cinpezzo)
Hello,I'm using pic24EP512GP204 with an external 10MHz crystal and I configured the oscillator with PLL enable so: Primary Oscillator -> 10MHz PLL enable:Prescaler -> 1:2 -> 2.5 MHzFeedBack...
View ArticleURL for offline install of MCC 3.15 (Howard Long)
Folks I needed to do an offline install of 3.15 but the link currently on the MCC page still points to 3.0.5. After a bit of sniffing about, the URL for the 3.15 file is at:...
View ArticleDSPIC33EP32MC504 oscillator (diegoufg)
I'm use MPLABX 3.30 and MCC 3.15 with this dspic i not configure oscillator property I set FRC Oscillator with 1:1 postscaler i want to set PLLDIV value = 58 but it is not possible ( PLL prescaler 1:2,...
View ArticleMCC Warning: Function "CK does not have output setting "RC4PPS" set to pin...
Hello, I recently downloaded MPLABX 3.3 and the associated compilers and MPLAB Code Configuration. It has been a couple of years since I used the PIC tools and I have to say I was impressed with how...
View ArticleURL for offline install of MCC 3.15 (smays)
MPASM, MPLINK, MPLIB (assembler, linker, librarian: http://www.microchip.com/forums/fb.ashx?m=932654..
View ArticleMCC I2C - Repeated start (ultiblade)
Hi all, I'm trying to interface a MMA8452 acceleration sensor over I2C using a 18F44K22 and the code generated by MCC v2.25.2 for an I2C master. So far this is not working. It only returns 0x00's on...
View ArticlePIC18F45K80 not setting ANCON registers (jswanson)
Pin Manager is not setting ANCON0 or ANCON1, so all inputs are analog irrespective of the check box in Pin Manager. RE2 Alalog check box is missing (AN7). void PIN_MANAGER_Initialize(void){ LATB = 0x0;...
View ArticleMCC v3.15 Released (burke_davison)
Hello MCC Users, We are excited to announce a major update to the MPLAB Code Configurator: MCC v3.15. It may be downloaded within the MPLAB X plugin portal, or from http://www.microchip.com/mcc. This...
View ArticleCode Configurator Bugs in V3.15 for PIC18F46K80 (stantheman103)
Hi, As well as the code configurator not setting the ANCON0 and ANCON1 registers when setting digital inputs. I am trying to use the weak pullups on PORTB. Although the weak pullups are enabled, it is...
View ArticleTMR1: The OSO pin needs to be allocated to this module (shachee1)
Hi,I'm having the same problem with TMR1: The OSI pin needs to be allocated to this module.Working on a PIC16LF1708.I can't work with INTOSC as when I'm going to SLEEP() the INTOSC turns off.Thus for...
View ArticleDoes mcc v3.15 support adding custom initialization function (genome692002)
In v2.5 i can add and name different initialization functions but i cant find how to do it in v3.15 is this no longer supported. How do you add different configurations. Example for pwm i want maybe...
View ArticleHow to Enable WPU, IOCP or IOCN (dcarrington)
First time user of MCC 3.03.Environment:MPLAB X 3.20XC16 1.25PIC24FV32KA301Using the MCC Pin Module I have successfully set PIC24 pins to their appropriate mode. In my case, there is one A/D channel, 5...
View Article
