PIC12F1840 wrong pin manager with MPLABX V3.30 (Austin911)
Hello, MCC pin manager shows 18 or 20 pins for the 12F1840 ( normally 8 pins ) ! Here is my configuration :MPLABX V3.30MCC 3.15XC8 1.37Windows 7 pro There is no problem with MPLABX V 3.26 Thanks you,...
View ArticleUsing mTouch with MCC version 3 (Baconator)
Hi Everyone: First time trying this so I may be messing something up, but I cannot get the mTouch library configuration to allow me to choose a sensor, it says "no sensors available". I have setup the...
View ArticleSMBUS read error - XC8, PIC16F1618, MCC (abhishek@matternet.us)
Hi, I was working with I2C device connected to pic16f1618. The I2C driver was generated by MPLAB Code Configurator. I was able to read values from an I2C device. Now, I have a slave device that works...
View ArticleMCC v3.xx User Guide (RISC)
Hi,I just discovered the MCC v3.xx user guide which might help MCC beginners : http://ww1.microchip.com/downloads/en/DeviceDoc/40001829B.pdfRegards..
View ArticlemTouch library (Vladas Kaskonas)
In the current MPLAB Code Configurator (MCC v3.15), mTouch module is not suported for MCU I wish to use - PIC16LF1554. On Microchip website there is no mTouch library downloads or API documentation and...
View ArticleUART baud rate computation (carlopallini)
Could be improved.On 'easy setup' setting baud=115200 for FCy=16Mhz gives {BRGH=0, UBRG=7} with about 8.5% error.While the proper choice is {BRGH=1, UBRG=34} with circa 0.8% error, even {BRGH=0,...
View Articlemcc doesnt show my old configuration after restarting mplabx (ARGEBİLİSİM)
hello im using mplabx v3,15 , im using mcc code configurator , the prblm when i close i restart mplabx i dont see mcc what i confgure before i have to make them from zero , so every time i have to...
View ArticleWhat PC load program works with mcc_generated boot loader for the...
I just generated a bootloader for the 18F46K80 (and hopefully the 18F25K80) PIC. What PC program (Bootloder program works with it? Possibly Tru Track v. 1.5? Thanks...
View ArticleMCC 3.15 USB Lite (andig)
Hi,The USB Lite within MCC 3.15 is a real time saver and liked it much. I was using a PIC24FJ128GB106. However when trying a simple CDC basic simple apps the generated USB files contain reference to ,...
View Articleerror MTOUCH_Service_Mainloop() (Diksten)
I'm new to MCC and I'm trying to configure mTouch. In the notifications of MCC it tells me to place a call to MTOUCH_Service_Mainloop() in my application's main loop. But when I do so the notification...
View ArticleMCC 3.15.00 and PIC12F1840 devices pin count is incorrect. (sylphio)
After updating to MCC 3.15 the pic12F1840 (a 8 pin device) is now represented by a 18pin device (dip,soic, all layout) in MCC.I got this problem on a existing project and a new ones. Thank..
View ArticlePIC18F45K80 not setting ANCON registers (jswanson)
Pin Manager is not setting ANCON0 or ANCON1, so all inputs are analog irrespective of the check box in Pin Manager. RE2 Alalog check box is missing (AN7). void PIN_MANAGER_Initialize(void){ LATB = 0x0;...
View ArticleMCC v3.1.5 with 24EP512GP204 PLL issue (cinpezzo)
Hello,I'm using pic24EP512GP204 with an external 10MHz crystal and I configured the oscillator with PLL enable so: Primary Oscillator -> 10MHz PLL enable:Prescaler -> 1:2 -> 2.5 MHzFeedBack...
View ArticlePIC16F1847 V3.15 Bugs (jswanson)
PIN MODULE: IOC is always set to Both if Positive or Negative are selected.Notifications: System clock gives a greater than recommended value (20MHz) warning if you use the PLL...
View ArticleUsing mTouch with MCC (Diksten)
I'm trying to use mTouch with MCC but I can't get it working.I set up a button with MCC but I can't use it in my code. My main: #include "mcc_generated_files/mcc.h"void main(void){ SYSTEM_Initialize();
View ArticleBootloader PIC16f18855 (homisinho)
I created a new project for PIC16f18855;Add bootloader Generator;-Transport type UART-Autobaud Software-...Generated the source;-pic16f1_bootload.asm created;-pic16f1_hardware_defs.inc created; I have...
View ArticleBootloader support (Paul Wolstenholme)
Hi, I'm struggling to use the results of the MCC bootloader module with a PIC16F1936. The only help I can find connected to the MCC's bootloader is comments in the code it generates. I'm having trouble...
View ArticleMLA USB lite project not building (jarin)
Hello,I set up a few sample projects with MCC and here are my thoughts about it: 1, In general, it does what is expected. I understand making support for hundreds of PIC variants is hard work and I...
View ArticleERROR Lenght PIC18F452 (Rafaelsm1910)
MPLAB XC8: http://www.microchip.com/forums/fb.ashx?m=937452..
View ArticleCode Configurator doesn't support PIC18F4550... (TonyShell)
Hi, I am trying to program a PIC18F4550, but when I try to configure the clock, EUSART, etc. using the MCC, it says it doesn't support it. It supports the 45J50 and 45K50, so I switched the type of PIC...
View Article
