Problems with MCC 3.26.4 and TCP/IP Lite (Jaffa)
Hello. I am trying to create a trivial project using TCP/IP Lite for a PIC18F97J60 based controller board. If I can get this working then I can use the trivial project as a platform on which to write...
View Articledspic33ep256mc204 pwm redundant mode problem (omerzora)
Hello, I have the following configuration:MPLAB X IDE v3.60XC16 (v1.31)dsPIC33EP256MC204MCC v3.26.4 I can not set IOCONx register' PMOD bits to 01 (PWMx I/O pin pair is in the Redundant Output...
View ArticleMore problems with MCC 3.26.4 and TCP/IP Lite (Jaffa)
Hello. For this past week I have been trying to get TCP/IP Lite working with a trivial project. The boss is now 24 hours away from pulling the plug on this project and abandoning a Microchip solution....
View ArticleClock switching on the fly (PIC_Fan2016)
Hi guys,im using PIC18F97J94. Currently, I have a problem with switching clock(oscillator) on the fly.My setting before switching: OSCCONbits.COSC0 = 1; // Fast RC Oscillator (FRC) divided by N...
View ArticleStrange data is sent from i2c function (Vividhobby)
HelloI appreciate it if you help me on this issue.I am trying to use "i2c function" which build by MCC on XC8. I wrote simple program with using "I2C_MasterWrite()" function as follows. It worked, but...
View ArticleSuggestions for the next release of MPLAB® Code Configurator (florin.matei)
This thread is dedicated to gathering suggestions related to what features could be improved or added in the next release of MCC. Please try to provide some arguments for your suggestions as they will...
View ArticlePIC16F1509 CLC problems with MCC 3.x (DARKPIC)
While trying to reproduce the project presented in this page all works ok using MCC 2.52.2.Moving to MCC 3.26.4 (every MCC 3.xx.x has same errors) and doing same steps gives some errors while trying to...
View ArticleeCAN not available in MCC?? (rallyr)
I need to use the eCan module in my dsPIC33EP256GP504, so I figured this is a good time to try out the MCC for the first time. (I've done other 8 bit PIC projects without it, but this is my first 16...
View ArticleNeed Help! MCC configuration on CAN SPI click board using Curiosity board...
Hi all, I am going to add a CAN SPI click board to Curiosity board based on the MCC. - CAN SPI click (5V): https://shop.mikroe.com/click/interface/can-spi-5v - Curiosity HPC Development Board...
View ArticleFoundation services SWUART (IvanP)
Good morning, i use PIC18K46K22 and i wanted generate software uart with SWUART library. When i select any pin in "Pin manager grid" the MMC not generate the code. If i deselect the pin, MCC generate...
View ArticleMCC UART module (Severino)
I'm trying to configure a dsPIC33EV256GM102 using MCC v3.26.1 (in MPLABX v3.60). In the UART module I'd like to set register U1MODE to TX_RX_RTS, but the only available option is TX_RX.I know I can...
View ArticlePIC32MM and ADC using MCC (Claudio one)
Hi guysI'm starting to use the 32MM series , very nice MCU , i understand almost all and it's working but i have just a problem with ADC and i suspect in a bug or my fault but i don't understand the...
View ArticleMCC Version: 3.26.4 Save confirmation Bug (cintet)
HI, Device: PIC16F1619MPLABX V3.60MCC V3.26.4Debugger: Pickit3 Everytime, after beginning a debug session, an annoying MCC Confirmation window ask for save MPLAB Code Configurator. Clicking Yes or No,...
View Articleturn off auto-confirm save MCC config? (j2423)
Anyone else observe with the latest MCC update that there's a regular autoconfirm to save MCC config. eg if you run the debugger? Even if nothing has changed in the MCC config. Is there a way to turn...
View Articlehelp clock selection on odroid usbio with pic18f45k50 (selvam)
Dear friends,iam unable to select usb compatible clock selection in mccplease see attached picture and tell me what to select for usb compatible clockRegardsSelvam..
View ArticleProblems with I2C basic example (ramon.gomez)
Hello, im trying to use the I2C example with the PIC16F46K22. I started with the example but doesnt work. I just found MCC was configuring my MSSP (1 and 2) ports for SPI Master Mode and not for I2C...
View ArticleHow to use MCC SPI Libary (Krixen)
I am having a lot of trouble implementing this MCC SPI generated library. I see there is the Exchange8bit but I am using a LPS331AP chip that requires that I do everything in 16 clock cycles. Does this...
View Articledid not get data from LIN SLAVE TO LIN MASTER (sutarabhijit1)
hey i am using two 18f24k22 pic mc with mcp2021500 lin trans-receiver ic. one board is master and another is slave.for this i used mplabx ide v3.55 with mplab code configurator v3.26.2. from mcc i got...
View ArticleTemperature sensor library in MCC (Mysil)
Looking thru release notes and MCC webpage for the current release, there seem to be a Temperature sensor library available. While this is a admirable effort, and the functions may work as intended,it...
View ArticleEusart receive issue (Franzis95)
Hi everyone! I have been having a trouble here, it would be nice if someone could give me a refence or help. I want to read the received data from the eusart of a pic18f25k22, for this I'm using the...
View Article