HiI can't able to open PIC18F Unified boot loader, downloaded from microchip site I am using this link for downloading software https://www.microchip.com/promo/8-bit-bootloaderIs there another versions of software available?Anyone give suggestions, if any..
↧
bootloader application (sridhar6994)
↧
pic18f46k80 bootloader using MCC (sridhar6994)
HiI have generated bootloader code using mplab x ide v5.30 with xc8 v2.10 versionCode is builded but bootloader program is not flashedI have checked uart tx and rx separately and also the bootloader entry input pinuart and gpio is configured correctly and..
↧
↧
Can't change SPI to I2C (cintet)
Hi, MCC: v3.95.0Device: PIC18F26K80MPLABX: v5.40 Can't change MSSP mode from SPI (Default loaded mode) to I2C. Chosing I2C from Serial Protocol does nothing and return to SPI...
↧
Can't use TMR 0, 2, 4 with PIC18F26K22 external HS clock? (ndcroos)
Hello all, I am using a PIC18F26K22 and MCC v3.My problem is that I am not able to use TMR4 to generate a 1 second timeout interrupt.I also can't use TMR0 and TMR2 to generate an interrupt.However, TMR1, 3 and 5 are able to generate interrupts.I am not su..
↧
Adding 16-Bit Bootloader to working project (jtzeng)
I have a project on a PIC24FJ256GA705 and need to add the 16-Bit bootloader.For the older project it will not show the bootloader in the Library area. Only in new projects...
↧
↧
16-Bit Bootloader Limit Application area (jtzeng)
When configuring a bootloader project the MCC setup for the bootloader has an area to set a number for fields.Application Start/End, ATV Address.It looks like I can't change the Application End Address.I need to reserve space and protect a cal table area...
↧
Changing Core Selection. (jtzeng)
I need to change the Core selection for a working project.I am on 4.65 for a PIC24FJ256GA705.I need to update to 4.85 so I can load the bootloader Lib I want to use.But when I generate code the generated files have way to much to resolve. Do I have to reb..
↧
When MCC is started device family packs (DFP) are no longer active. (seyyah)
I tried different things including re-installation of everthing and different versions of mplab and compilers etc; but no luck. When I start MCC, there is an exclamation mark near the dfp pack version number complaining about incompatible to MPLABX versio..
↧
DSPIC33FJ128GP802 MCC error (refixnetwork)
i got the following error.The project's device is not supported by the currently loaded libraries. All library versions are available for download on the MCC please help me to solve. attached images for reference..
↧
↧
Harmony launch error (Techdisc)
An error occurred while running MPLAB Harmony configuration. I have updated the configuration and can't figure out other reasons.The appendix is the screen shot of the error information...
↧
MCC PIC24 CORE 4.85 UART1 Buffer support deprecated (jtzeng)
I just started a new Bootloader Application (the APP part) and when I chose UART1(PIC24), it would generate code where the TX/RX buffer support was there, but it all have deprecated attribute added to it with no indication what to replace it with. Anyone ..
↧
MCC Code Generation issues in Core 4.85 and 5.01 (jtzeng)
It looks like the MCC CORE updates are breaking things right and left.In ADC1 (PIC24) setup it generates adc1.c and adc1.h which do not match (see attachments).In adc1.h STOP/START are to be replaced with and Enable Sample and Disable Sample. This happens..
↧
What happened? - Updates Required - These plugin(s) have installed a dependency update: (RDS Cliff)
I opened up MPLAB X IDE this morning and was greeted with a dialog box with the following: These plugin(s) have installed a dependency update:MPLAB Code ConfiguratorThe following plugin(s) have critical updates for compatibility. These plugins must either..
↧
↧
Include errors and mcc.h produces This File will be removed (fsonnichsen)
I have a fresh "gen" from MCC and I am using the main.c that it generates. I have added to my code, a few lines leading to: UART1_Write('U'); The code compiles and runs but produces an unresolved reference for the UART1 command.Looking at system.h which i..
↧
Complete export of the MCC file (fsonnichsen)
The MCC guides show how to export "individual" peripherals for import by another program. However they do not indicate how to export the complete MCC database for export.When I laboriously choose all of the MCC peripherals and click export it indicates th..
↧
cannot install MCC (K3PTO)
I am reverting to MPLabX 5.1 since 5.4 does not support MPASM. However, I am unable to install MCC. I keep getting told that I need packmanagerservice. I never had this problem before! What am I doing wrong?..
↧
Issue with Timer config (mpittman)
I am using MCC v 5.35 with a PIC24FJ128GC010. The Primary osc is set at 18.432MHz (Fosc) giving an Fosc/2 of 9.216MHz. When configuring a Timer (TMR2), I am selecting the Fosc/2 as the Clock Source and the Input Freq correctly appears as 9.216MHz. I choos..
↧
↧
Hopefully a simple MCC question (JohnWill)
I'm attempting to configure the weak pullups using MCC with version 5.40. I am getting this error. Please enable nWPUEN bit from register view.I believe I am in register view, so how do I get rid of this warning. Perhaps I just don't know what Register vi..
↧
Got "SEVERE: Invalid configuration file" on MPLABX with MCC (Vividhobby)
Hello, please advise me on this matter. I have an experience on MPLABX with XC8, but I wanted to try use PIC32MX with XC32 on MPLABX.After created a new projuct with PIC32MX, I got an error message above.What am I wrong with ?The log is as follows.Thsnk y..
↧
Enabling UART1 causes incorrect ADC initialisation (FarmerJones)
MCC V4.0.1
MPLAB X V5.40
Windows 10 x64
XC V1.60
dsPIC33EP32MC204
PICKit 4
Hi,
I have a working project, see MyConfig(WORKS).mc3 and IDE Log(WORKS).txt.
Essentially it uses an interrupt to service sensor inputs from a BLDC motor in order to driv..
↧