MCC; SEVERE: Unable to save configuration file. (JJ10)
Hey Guy's,after last update to the newest MPLAB X the MCC makes big trouble.The error output is: SEVERE: Unable to save configuration file.So whatever I do in MCC will not be saved. Sometimes a few...
View ArticleMCC 8 bit bootloader PIC16F18326 - Read config word mismatch (LarryTh)
Hello,I noticed some discrepancy between "Bootloader Generator User's Guide - DS40001779B" / Host application / Get version command and actual data returned by PIC16F18326, "Config words" should be...
View Articlemcc mikro-e 485 clickboard does not build (nr002541)
Hi. I am looking to implement 485 so decided to try the clickboard in mcc. However when I try and build it does not compile because no pin is selected for the rs485-txen. It hints I should go to the...
View ArticleMCC 4.2.1 Help on interface a DAC and generate an Output of 1.5V + MCC manual...
Hello there. I am using MPLABx v5.50 with code configurator v4 dsPIC33CK256MP506 with the associate compiler. I am looking for a manual to use the code configurator v4. Online, I can find just older...
View ArticleMCC 4.2.4 Help on interface a DAC and generate an Output of 1.5V + MCC manual...
MCC 4.2.4 Help on interface a DAC and generate an Output of 1.5V + MCC manualHi All, I am using MCC 4.2.4 with MPLABx v5.50 pic: dsPIC33CK256MP506 I am looking for a guide to configure DAC and set up...
View ArticleBest Practice or Excessive Coding (momiccioli)
I have been using MPLAB-X and MCC for a while now for various projects and have been successful. While the environment is not my favorite I can work with it. Recently I have been working on a project...
View ArticleI2C frustration (Lance Beasley)
The Microchip MCC code expects a right-shifted 7-bit device address. The read/write bit is left out. I know that was mentioned somewhere, but not in one concise location. Another lesson learned- you...
View ArticleMCC version compatibility 4.2.4 (PTPeixoto)
Hello Was melody library removed in the latest version of MCC ? I had a project created with version 4.2.3 and when i update to 4.2.4 (compatibility update required) the attached error appears. i'm...
View ArticleSupported Devices List (CScotty)
Where can i find a list of devices supported by each version of the Code Configurator? Thanks...
View ArticleUnifiedHost-1.1.18.0 crash when selecting COM Port (lucabianchi91)
Hi,I am adding a bootloader to my PIC18LF47J53 XC8 application by following the guide at https://www.microchip.com/promo/8-bit-bootloader. Unfortunately, the UnifiedHost application crashes as soon as...
View ArticleBootloader protocol does not support big erase range (lucabianchi91)
Hi, I am trying to have a working bootloader for an XC8 PIC18L47J53 application by following the official bootloader guide. I notice that the protocol implemented by UnifiedHost 1.18.0 gets stuck at...
View ArticleMCC not starting up (OneElectron)
I am getting set up to write programs for some 8-bit PICs, initially the PIC18F57Q43. I have downloaded the MPLAB X IDE program and the XC8 compiler. I've downloaded a sample program from the Microchip...
View ArticleDMA with UART - How to get bus's status / error? (novo.g.berthiaume)
Hi,I want to send and receive data with the UART peripheral using a DMA to reduce CPU load.Before sending data to the DMA, I'd like to check if the bus is ready and without error. I'm not sure how to...
View ArticleMCC with PIC32MX (Izseko)
Hello, MPLABX V5.50, XC32 V3.01, MCC V4.2.4Just created new project for PIC32MX150F128D, when i open MCC i got message "Device is not supported by currently loaded libraries." I checked release notes...
View Articlemcc corrupted (hzdailian)
I really like the convenience of MCC, which means you can initialize the registers visually.However, the module seems corrupted today. Here is the IDE log.Anybody knows why?Kind of weird since I didn't...
View ArticleHow does Unified Bootloader Host works ? (PierrX)
Hi ! I was looking for Unified Bootloader Host's source code but I didn't found it. So I'm trying to create my own application but I don't understand how the UBH is working... I want to flash my...
View ArticleEnabling the 16-bit bootloader from the application (pattern in RAM/FLASH)...
I want implement on a PIC24FJ128GA106 the 16-bit Bootloader feature of MCC 4.0.2 . All the concepts are clear but I'm wondering how to enabling the bootloader directly from the application following...
View ArticleMCC does not allow assignment of SPI2 CS to RD8 (tfkeel)
In fact, MCC does not allow any assignment of RD8 - RD8 is CSn pin on mikroBus B socket of dsPIC33CH Curiosity Development Board - is there a workaround? Thanks...
View ArticleMCC SPI slave mode configuration for the PIC18Fx7Q43 (KingJL)
I have been developing an application to run on the PIC18F47Q43 and PIC1857Q43 processors. This application uses a client based SPI. There are 2 issues where MCC generates an incorrect configuration or...
View ArticleMCC stability issues (awolfe)
I was just wondering if others have stability issues with MCC running in MPLAB X? I am using MPLAB X v5.50 and MCC version 4.2.4, Windows 10. I have been using it for the first time on a new project....
View Article