Cannot check enable interrupt (Cyber)
I am using MSSP1 as SPI slave. In MCC->MSSP1->Registers I am unable to check the SSPI box that should enable the interrupt, neither the BCLI box for that matter. If I go to the Interrupt Module,...
View ArticleMCC generated code not working for I2C (ZhiHong)
MCC version: v4.26.1MPLAB X version: v4.00 Operating System and version: Microsoft Windows 10 Home Single LanguageCompiler version: XC32 (v1.44) Device name: PIC32MX110F016B Attach your MCC...
View ArticlePIC18F45K50 HID USB Interfacing with MCC (NiKHiL)
Hi, I am new to USB. I would like to develop a USB HID device using PIC18F45K50.IDE: MPLAB X 4.05Compiler: XC8 1.45The entire configuration was done using MCC and USB Framework Lite 1.25.5. After...
View ArticleMCC generated failure FLASH code to PIC18F47K42 (MuzioRD)
Hi, I would like to share the problem I had with MCC + PIC18F47K42.I am migrating all of my projects that used the PIC18F47K40 to the new k42 family. Because they were old projects, all the...
View ArticleUSB Host Lite (BumpSplat)
Is there any documentation showing the use of the USB Host Lite code generated using MCC? I'm struggling to use it as I'm trying to start a new application. I must be missing something.....? Thanks in...
View ArticleMCC generated I2C code not generating interrupts on send. (ctigs1)
MPlab X v4.05XC8 v1.45MCC v3.45.1PIC library v1.65.1Linux Mint 18PIC16F18875 on Curiosity HPC board. I was able to make the code work but after every masterwrite command I must manually set the SSP1IF...
View ArticleError while installing MPLAB Harmony in ubuntu (sanket.meher111)
Hi, I am having error while installing MPLAB harmony. Error in copying files. Screenshot is attached below. Need help. Thanks..
View ArticleMCC - TCP/IP lite - Multi socket at same port - WIFI (PICcie)
Hello, For a project, I have to receive IP packet over TCP and transmit informations on a serial line.For this, I think that a 8bits PIC is adequate. So I have started tests with MCC and the TCP/IP...
View ArticleAddress Error 0xFE using Unified Bootloader Application 0.1.14 and...
Hi Community, for a week now I am trying to get the the serial bootloader running for the PIC16F18324 but had no success so far and hope you can help me. For flashing the microcontroller I am using the...
View ArticleMCC PIC18F45K50 Timer 0 16bits mode configuration BUG (laffont)
Hello, I have strange behaviour, probably a bug. MPLABX 4.05 XC8 1.45 Pickit 3 (01.51.06) PIC18F45K50 (dip40) MCC (Core v4.35) With MCC configurator Using internal oscillator 16Mhz, and D0 as output....
View ArticleToggle Port (DaveTiffTaylor)
Hi, real simple newbie question Used MCC to generate some code, I have an output called fan drive (op_fan_drv) so its created the following #define op_fan_drv_TRIS TRISDbits.TRISD3 #define...
View ArticleMCC bootloader host app ala arduino (ambo)
I'm not really a programmer and just a hobbyist and have severely limited programming knowledge in PC app programming although I can program PICs using XC8 (mostly via trial and error). As I mentioned,...
View ArticlePin configuration problem for PIC32MM0256GPM048 (nagogam)
Hi all, I have a MCC project for the PIC32MM0256GPM048 uc at an advanced stage.Recently I wanted to use a RB3 pin but it didn't work as it should. The following codesnippet shows the issue:...
View ArticleMCC I2C - Repeated start (ultiblade)
Hi all, I'm trying to interface a MMA8452 acceleration sensor over I2C using a 18F44K22 and the code generated by MCC v2.25.2 for an I2C master. So far this is not working. It only returns 0x00's on...
View ArticleError when generate code, while EUART and MSSP-I2C are configured (ethrbh)
hello,I am new in MCC, and was started to play with this a bit. I am using PIC16F1615 device and tried configure MSSP-I2C and EUART. During the code generation there is an error, meaning some make...
View ArticleADACT settings in MCC (swmcl)
Hi, In the latest version (3.45.1) of MCC, the default and initial setting of disabled is not completely followed though. The register setting in pin module / registers / adactpps is not set correctly...
View ArticleMeaning for PIN Custom Name (ethrbh)
hello,I was interested what the "custom name" means in the "Pin Module". According to the description I found in http://microchipdeveloper...ress:gpiointroduction, this is like a additional given name...
View ArticleUSB-lite in MCC (catweazle)
Hi,It would be grat if USB-HID will be added to UAB lite in MCC. HID does not need to provide a inf and a cat file which is a great benifit. CDC and vendor, which is already present, does not offer...
View ArticleAdding a forum for adding new features to MPLABX and other MCP tools (catweazle)
Hi,MCP should offer a possibility (for users) to propose new features and improvents to existing MCP tools.regardsRupert..
View Article"configuration has warnings" - yet tab not displayed? (j2423)
Clicking "Generate" get a "configuration has warnings" popup. From memory, normally there's a tab with an exclamation mark which contains a list of the warnings.The tab seems to have disappeared.How do...
View Article
